WhoshouldIsee Tracks
Navigate To
6th October 2020 News


As of December 20, 2020, standards IEC 60950-1 for ICT equipment and IEC 60065 for AV equipment, and their regional harmonized standards, have been withdrawn.

Manufacturers who wish to place products on the market will need to meet the requirements of the new IEC 62368-1 standard to ensure compliance. This information aims to help manufacturers of affected products manage the transition and ensure continued compliance, by explaining the reasons for the new standard and its governing principles, the provisions built in to assist transition, and how best to ensure procured components like power supplies will satisfy its requirements.

IEC 62368-1 2nd Edition is more than a name change or merger of IEC 60950-1 and IEC 60065. The new standard is significant because it introduces a new hazard-based perspective to product testing for both audio and video (AV) and the Information and communications technology equipment (ICT) industries for EU and North America. The result of the new single standard means that it will implement different engineering principles and terminologies.

The IEC Technical committee who prepared the two previous standards IEC 60950-1 and IEC 60065, created the new standard to address the technological convergence of the AV and ICT industries, where equipment is now often capable of both AV functions such as playing music or video and personal computing. Because of the diversity of products covered by the Standard, it takes what is called a ‘hazard-based’ approach to product assessment. Compliance Scope & Timelines IEC 62368-1 is not a simple merger of IEC 60950-1 and IEC60065, it is a completely new standard only applicable to products within its stated scope. It has specific compliance criteria -some relating to performance and some to construction.
Manufacturers who wish to place products on the market will need to meet this standard to ensure compliance. Similarly, any product (to which the standard applies) that is currently on the market within Europe will be required to meet the new standard as of December 20, 2020. CENELEC has adopted the standard, and it has also been formally issued as an EN Harmonized standard, to be used in compliance against the LVD (Low Voltage Directive) for CE Marking purposes within Europe. CENELEC has announced implementation dates for the standard that will mandate its use throughout Europe -replacing both EN 60950-1 and EN 60065. For the CB scheme, IEC 62368-1 has been listed under categories OFF and TRON, and CB certificates and reports have consequently been issued.

Regional Variations

The IEC 62368-1 standard has been harmonized with other global standards for regional compliance. For this reason, you may as any of the following:

  • IEC/EN 62368-1
  • IEC/UL 62368-1
  • IEC/UL/CSA 62368-1

Hazard Based Safety Engineering Standard (HBSE)

The single, harmonized standard aims to create a more future-proof document by requiring that manufacturers show known hazards have been considered and their products have been built to be safe for use in their intended environments. Furthermore, IEC 62368-1 expects to give product designers more flexibility in their designs and evaluations, keeping pace with technology without requiring frequent, expensive, and onerous revisions.

With the advance of new technologies, and with them, new markets, the single, harmonized standard intends to provide a clearer framework within which to evaluate the safety of new equipment. As such, all current equipment that falls within IEC 60950-1 and IEC 60065 will be encompassed by the new standard, with additional products set to be included within its scope. A list of product categories includes the following:

  • Computing and networking products: servers, PCs, routers, notebook/laptop computers, tablets, plus their power supplies
  • Consumer electronics: amplifiers, home theatre systems, digital cameras, personal music players
  • Displays and display units: monitors, TVs, digital projectors
  • Telecommunication products: network infrastructure equipment, cordless and cell phones, battery-powered communication devices
  • Office appliances: copiers, document shredders
  • Various types of audio/video, information and communication technology equipment used in homes, schools, data processing centres, commercial and professional environments

In addition, the new standard is not just limited to products, but also relates, where applicable, to components and subsystems. Therefore, companies that source third-party subsystems like power supplies will need to establish whether the required product is certified to IEC 62368-1. Likewise, components that are fitted inside equipment, like chassis mount power supplies, are also subject to the standard, together with any external power supplies and adapters that are shipped alongside boxed equipment.

Hazards and safeguards

As mentioned above, the move to HBSE principles demonstrates a shift in focus for the new standard. HBSE is a field of safety science that has been gaining ground over the last 25 years, shifting product-safety legislation towards a performance-orientated way of thinking and making it more flexible and effective than prescriptive approaches. Its principles work to keep equipment users safe by identifying potentially hazardous energy sources that are capable of causing pain or injury to users and recommending the appropriate means of preventing those energy transfers from occurring. Its rationale can be summarized as follows:

  • Identify energy sources used
  • Measure energy levels they produce
  • Determine whether source energy is hazardous
  • Classify it accordingly
  • Identify how energy is transferred to a body part
  • Determine appropriate safeguarding measures
  • Measure effectiveness of safeguards

HBSE represents hazards and safeguards as three-block models that explain the link between energy source, energy-transfer mechanism or safeguard, and the end user, as follows:

As well as allowing for bodily injury, the new standard also applies the HBSE three-block measure to assess the potential for electrically caused fire, recognizing the need for a fuel to be present for ignition to happen. Furthermore, 62368-1 references all energy sources relevant to ICT/AV electrical equipment including electrical, thermal, chemical, kinetic, and radiated energy.

IEC 62368-1 standards classify the energy levels that a user might be exposed to as ES1, ES2, and ES3, with ES1 being the lowest category. A comparable rising scale is used when analyzing electrical-fire hazards and their means of prevention. This scale of energy levels helps designers establish the necessary safeguards needed for their product, including methods such as protective earthing, insulation, and fire-proof spaces. Likewise, the user him/herself is also categorized, this time by competence, as either an ‘ordinary person’, ‘skilled person’ or ‘instructed person’.

The new hazard-based methodology around safety analysis aims to give designers greater flexibility to design safety measures in the context of their own products, while at the same time requiring thorough assessment to guarantee that those products are safe to use and cannot cause bodily injury or fire. This approach supports the introduction of new and innovative methods of construction and technology without first needing to be amended. This will help reduce the differences between published regional and national equivalents of the standard.

Fortunately for our customers the path towards compliance has been made easier with our brand-new range of IEC 62368-1 certified Products.


Click here to view our new 62368-1 product range

Recent News

All Recent News

More Stories like this one

Get weekly updates on the latest power insights, news, products, case studies and tips right in your mailbox.

News & Blog
15th Jan 2024 News
Embracing the Future: Anticipating Robotic Automation Growth in 2024

Anticipating Robotic Automation Growth in 2024 During global economic shifts, the manufacturing landscape is evolving, ...

Embracing the Future: Anticipating Robotic Automation Growth in 2024
18th Dec 2023 News
Decoding the Significance of IP Ratings in Industry

Decoding the Significance of IP Ratings in Industry In the dynamic landscape of manufacturing and technology, where pre...

Decoding the Significance of IP Ratings in Industry
23rd Nov 2023 News
Protecting EV Users: The Importance of Residual Current Devices (RCDs) in Charging Infrastructure

What are Residual Current Devices (RCDs) Residual Current Devices (RCDs) are a critical safety component in electric ve...

Protecting EV Users: The Importance of Residual Current Devices (RCDs) in Charging Infrastructure
27th Sep 2023 News
Why Power Supplies Are Critical in Commercial Refrigeration Transportation

The commercial refrigeration transportation industry relies heavily on the efficacy and reliability of the power supply ...

Why Power Supplies Are Critical in Commercial Refrigeration Transportation

Are you ready?

Speak to the power supply & conversion experts

Sign up to our Newsletter
0/4 Compare