Customer Notice: Last orders before the 9th of December Read More

Glary – DC-DC Converters

Ideal Power and Glary Power Technology boast a strong working relationship over years, ensuing the highest level of service coupled with quality products.

Glary Power Technology are leading innovators of board mount DC/DC converters and are constantly pushing the boundaries of what is possible. Glary are known for producing extremely reliable power converters that exceed 90% efficiency and have an impressive power density to size ratio.

Established in 1998, Glary have proved to be a reliable option for electronic design engineers due to a unique combination of industry-leading design, immense reliability and superior knowledge. The Glary business model is built on patents pushing the boundaries of design by exceeding expectations for the design and manufacture of DC/DC converters.

When designing electronic hardware, Glary technology and the IP Support engineering team work together to match the exact application power requirements whilst working closely with the application design engineers. The IP Support team provide assistance through the whole design process from concept, design, quotations, samples and testing to approvals and standards compliance, shipping, stock-holding and after-sales service.

Glary Power Technology is the elite choice for DC/DC power conversion.

What’s New

Pulsed-load-signal-estimator (Pulser) the newly-released 12V/300W Pulser Series high efficiency eighth brick dc-dc converter, which is designed with patented “Buck-reset Forward” topology and proprietary partial-resonant SR circuit technology to achieve high conversion efficiency.

Features of the P08 1/8 Brick

  • 300W 93% in 0.48 x 1.02 x 2.41 inch
  • Temperature: -60’C~+130’C
  • Pressure Range: – 1m~100 Bars
  • Power Density: 300W/in3
  • UltraFast i-Limit Technology
  • Built-in Current Share
  • External Synchronisation

Applicatons the P08 is suitable for

  • deep water probes
  • pulsed laser equipment
  • pulsed emitters
  • RF amplifiers
  • high altitude instruments

Click here to view the P08

Read the latest news from Powerpulse

E08 1/8 Brick

The benchmarks Glary Power Technology set two years ago hadn’t been broken when the E32 was demonstrated in testing conditions. Recently, Glary Power Technology has exceeded that performance by releasing the E08 series eighth-brick, that delivers up to 3.2-times the E32’s output power, with the same extreme operating conditions. (taken from PowerPulse Nov 2018).

Read more here

Features of the E08 1/8 Brick

  • 400W-94% in 0.43 x 1.02 x 2.41 inch
  • Temperature: -60’C~+130’C
  • Pressure Range: – 1m~100 Bars
  • Power Density: 360W/in3
  • UltraFast i-Limit Technology
  • Built-in Current Share
  • External Synchronisation

Click here to view the E08 series

E32 Hex-Brick

The benchmarks Glary Power Technology set two years ago have yet to be broken. During electronica 2016,  the 125w E32 brick was demonstrated with the unit placed in the water, and no other DC DC converter has come close for its performance in these conditions. (taken from PowerPulse Nov 2018)

Hex brick operates at temperatures -60~+130’C, includes ultrafast current limiting circuit and is designed for higher environmental resistances.

Features of the E32 Hex-Brick

  • 120W-94% in 0.43 x 1.04 x 1.25 inch
  • Temperature: -60’C~+130’C
  • Pressure Range: – 1m~100 Bars
  • Power Density: 230W/in3
  • UltraFast i-Limit Technology
  • Built-in Current Share
  • External Synchronisation

Click here to view the E32 series

 

Glary DC/DC product guide

Select from isolated and regulated industry-standard forms ranging from 40W to 2KW available with single or dual output:

  • Full Brick – (Brick)
  • Half Brick – (1/2 Brick)
  • Quarter Brick – (1/4 Brick)
  • Eighth Brick – (1/8 Brick)
  • Sixteenth Brick – (1/16 Brick)
  • Thirty-Second / Micro Brick – (1/32 Brick)
  • Sixty-Fourth / Nano Brick – (1/64 Brick)

Browse categories below then customise a design to meet project requirments:

Technology and design

The Glary Power Technology business model embrases the continuous improvement of designs to produce market-leading products:

  • Fewer components on system board
  • Faster transient response
  • Lower ripple and lower RFI noise
  • No Tantalum capacitors are used which increases MTBF
  • High Density in a small form factor
  • Extremely low heat generation / loss

Unique, low heat, high power design

  1. Single-sided component layout allows for easy mounting on the base
  2. Sink-Plate options eliminate the need for extra heat-sinks
  3. Specify vertical or horizontal heat-sink fins to increase compatibility with system air-flow
  4. Smooth and precise edges of the base plate allow for a compact fitment

Buck Reset Forward technology

US Patent Granted – US6239989

Exclusive to Glary, patented Buck Reset Forward Technology improves Synchronous Rectification (SR) operation by reducing the amount of components required. Achieved through a technique which improves the efficiency of rectification by replacing diodes with actively controlled switches usually power MOSFETs or power BJTs, this innovative and unique topology design reduces heat generaton, improves thermal effencicy through equal heat distribution and allows an incredible amount of power to be available.

Reducing the footprint required by the power supply on a PCB provides a huge benefit for system hardware design as other system / application critical components can reclaim space.

Filtering and Ripple elimination
Ripple free performance by our unique circuit topology with no additional filtering components on primary side.

Full project design assistance

With over 40-years of experience in the power supply industry, the IP Support team work as a technical partner or an extension to a design team to cooperate in the design process and offer full project power supply support covering prototyping samples, manufacturing, shipping and even the stock-holding of units in the UK ready for call-off at the customer’s convenience.